[n9005][2014/DEC/01][TWKK] faux123/Yank555.lu kernel 002b3

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby Spider_Pig27 » 28 May 2014, 06:29

So this kernel Cant be used for the T-Mobile note 3?
Spider_Pig27
 
Posts: 4
Joined: 04 Feb 2014, 05:05
Has thanked: 2 times
Been thanked: 0 time

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby yank555 » 28 May 2014, 06:50

It's based on n9005 sources and uses a n9005 ramfs, I can't tell you more ... I only have a n9005 personally and don't know the exact specifics of the T-Mobile.

From what I read, it coukd work, but NFC at least might not work, but that's hear-say at best...

JP.

Send from my 'proudly eFused' Note 3 (n9005) running Temasek v85 on Yank555.lu htle v1.0b-beta5 (3.4.91) kernel.
Nexus 5 (aka. Hammerhead) 32Gb
Note 3 SM-N9005 32Gb Proudly eFused
SGS3 GT-I9300 32Gb
HTC Sensation XE
HTC HD2
TF300TG 32Gb

Image
Credits FAdrums !
User avatar
yank555
-----------
 
Posts: 3520
Joined: 11 Mar 2013, 20:51
Has thanked: 924 times
Been thanked: 4608 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby jdidtht » 28 May 2014, 15:41

yank555 wrote:It's based on n9005 sources and uses a n9005 ramfs, I can't tell you more ... I only have a n9005 personally and don't know the exact specifics of the T-Mobile.

From what I read, it coukd work, but NFC at least might not work, but that's hear-say at best...

JP.

Send from my 'proudly eFused' Note 3 (n9005) running Temasek v85 on Yank555.lu htle v1.0b-beta5 (3.4.91) kernel.


I currently use this kernel off and on, and although I have issues with the min scaling at rest, (same with your cm kernel) only happens with yours and fauxs 9005 now, everything else I use works fine on tmob. I regularly use sapecs zancum kernel and have no issues other than NFC which I never use anyways.. Love the work, love what you do.

Image
jdidtht
 
Posts: 111
Joined: 27 Oct 2013, 17:45
Has thanked: 80 times
Been thanked: 24 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby jackyaway » 30 May 2014, 17:45

Hi! I'm using 001a6 kernel since the release day without a issue. Today i tried for the first time to change voltage settings. My intention was to decrease 12 mV globally using fauxclock app. I already did this operation successfully when on JB rom. Now, when i select -12 and click on apply globally, all voltage are increased instead of decreased. This happens with every value and also applying voltage one frequency at time. I'm using fauxclock 2.0.1, someone who have/had this problem? I already cleaned and reinstalled fauxclock. Thank you.

Inviato dal mio SM-N9005 utilizzando Tapatalk
jackyaway
 
Posts: 27
Joined: 24 Dec 2013, 14:26
Has thanked: 22 times
Been thanked: 19 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby Julian Jeremiah » 30 May 2014, 18:22

Yes, have had this issue too with all versions but I just kept silent :D

Seem to be some bugs bcoz for example: if you click -12 it'd either ascend or descend the value. So what I did was -24 again then it'd works :P it'd goes haywire sometimes..

jackyaway wrote:Hi! I'm using 001a6 kernel since the release day without a issue. Today i tried for the first time to change voltage settings. My intention was to decrease 12 mV globally using fauxclock app. I already did this operation successfully when on JB rom. Now, when i select -12 and click on apply globally, all voltage are increased instead of decreased. This happens with every value and also applying voltage one frequency at time. I'm using fauxclock 2.0.1, someone who have/had this problem? I already cleaned and reinstalled fauxclock. Thank you.

Inviato dal mio SM-N9005 utilizzando Tapatalk
Julian Jeremiah
 
Posts: 43
Joined: 12 May 2014, 14:57
Has thanked: 21 times
Been thanked: 6 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby yank555 » 30 May 2014, 19:15

Julian Jeremiah wrote:Yes, have had this issue too with all versions but I just kept silent :D

Seem to be some bugs bcoz for example: if you click -12 it'd either ascend or descend the value. So what I did was -24 again then it'd works :P it'd goes haywire sometimes..

jackyaway wrote:Hi! I'm using 001a6 kernel since the release day without a issue. Today i tried for the first time to change voltage settings. My intention was to decrease 12 mV globally using fauxclock app. I already did this operation successfully when on JB rom. Now, when i select -12 and click on apply globally, all voltage are increased instead of decreased. This happens with every value and also applying voltage one frequency at time. I'm using fauxclock 2.0.1, someone who have/had this problem? I already cleaned and reinstalled fauxclock. Thank you.

Inviato dal mio SM-N9005 utilizzando Tapatalk


This would go reported in the faux clock G+ beta group, as either faux clock and voltage control are made by faux, I am not into this UV stuff at all, I never add a voltage interface in my kernels (my reasons can be found in the FAQ of my i9300 kernels here) ;)

JP.
Nexus 5 (aka. Hammerhead) 32Gb
Note 3 SM-N9005 32Gb Proudly eFused
SGS3 GT-I9300 32Gb
HTC Sensation XE
HTC HD2
TF300TG 32Gb

Image
Credits FAdrums !
User avatar
yank555
-----------
 
Posts: 3520
Joined: 11 Mar 2013, 20:51
Has thanked: 924 times
Been thanked: 4608 times

Re: R: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel

Postby jackyaway » 31 May 2014, 05:37

yank555 wrote:
Julian Jeremiah wrote:Yes, have had this issue too with all versions but I just kept silent :D

Seem to be some bugs bcoz for example: if you click -12 it'd either ascend or descend the value. So what I did was -24 again then it'd works :P it'd goes haywire sometimes..

jackyaway wrote:Hi! I'm using 001a6 kernel since the release day without a issue. Today i tried for the first time to change voltage settings. My intention was to decrease 12 mV globally using fauxclock app. I already did this operation successfully when on JB rom. Now, when i select -12 and click on apply globally, all voltage are increased instead of decreased. This happens with every value and also applying voltage one frequency at time. I'm using fauxclock 2.0.1, someone who have/had this problem? I already cleaned and reinstalled fauxclock. Thank you.

Inviato dal mio SM-N9005 utilizzando Tapatalk


This would go reported in the faux clock G+ beta group, as either faux clock and voltage control are made by faux, I am not into this UV stuff at all, I never add a voltage interface in my kernels (my reasons can be found in the FAQ of my i9300 kernels here) ;)

JP.

Thank you! I'll try as Julian Jeremiah said and i'll report this issue in the faux app community. ;)

Inviato dal mio SM-N9005 utilizzando Tapatalk
jackyaway
 
Posts: 27
Joined: 24 Dec 2013, 14:26
Has thanked: 22 times
Been thanked: 19 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby Julian Jeremiah » 11 Jun 2014, 06:18

Yank,

May I ask what is powermanagerservice.wakelocks and bum_dmux_wakelock? Both are under kernel wakelock shown in BBS app.
Julian Jeremiah
 
Posts: 43
Joined: 12 May 2014, 14:57
Has thanked: 21 times
Been thanked: 6 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby yank555 » 11 Jun 2014, 11:13

Julian Jeremiah wrote:Yank,

May I ask what is powermanagerservice.wakelocks and bum_dmux_wakelock? Both are under kernel wakelock shown in BBS app.


Is the placeholder in Kernel Wakelock for all the "Partial Wakelocks", so the detail of what it represents is what you see in "Partial Wakelocks".

As for "bum_dmux", I found this in Googling, might help.

JP.
Nexus 5 (aka. Hammerhead) 32Gb
Note 3 SM-N9005 32Gb Proudly eFused
SGS3 GT-I9300 32Gb
HTC Sensation XE
HTC HD2
TF300TG 32Gb

Image
Credits FAdrums !
User avatar
yank555
-----------
 
Posts: 3520
Joined: 11 Mar 2013, 20:51
Has thanked: 924 times
Been thanked: 4608 times

Re: [n9005][2014/MAY/21][TWKK] faux123/Yank555.lu kernel 001

Postby Julian Jeremiah » 11 Jun 2014, 12:33

Ahhhh thanks! Guess it's normal for me then since I'm using those kinda apps

yank555 wrote:
Julian Jeremiah wrote:Yank,

May I ask what is powermanagerservice.wakelocks and bum_dmux_wakelock? Both are under kernel wakelock shown in BBS app.


Is the placeholder in Kernel Wakelock for all the "Partial Wakelocks", so the detail of what it represents is what you see in "Partial Wakelocks".

As for "bum_dmux", I found this in Googling, might help.

JP.
Julian Jeremiah
 
Posts: 43
Joined: 12 May 2014, 14:57
Has thanked: 21 times
Been thanked: 6 times

PreviousNext

Return to Kernels

Who is online

Users browsing this forum: No registered users and 7 guests

cron