[hlte][2014/DEC/07][CM11/12] Yank555.lu kernel v1.1c-beta6

[yank555]

and I'm also having that phone call proximity issue that was mentioned before

Sent from my SM-N900P using Tapatalk

Three calls with M7 and stock kernel from cyanogenmod and no problem with phone app till now, if the problem appears I'll let you know immediately.

It may be kernel related but which part? Does the kernel interact with proximity sensor?

The exact explanation of the problem is :

- a call is done
- phone goes near to the face
- proximity sensor shuts the screen of
- phone is taken away from the face
- the screen still stays off
- when the screen is touch, the haptic sound happens
- no action (power button, home button,...) could power on the screen.
- wait a long time or hard reboot solve the problem.

I hope this explanation could help to solve the problem if it's due to kernel.

Envoyé de mon SM-N9005 en utilisant Tapatalk

Only thing where proxy is 'changed' is for touchwake. but it's just read.

Never had this myself, and I do use my phone for calls, via handfree in my car and using the normal dialer...

JP.

Send from my 'proudly eFused' Note 3 (n9005) running Temasek v85 on Yank555.lu htle v1.0b-beta8 (3.4.92) kernel.

[otisman]

That's weird but I do know in w03 slimkat there's a override to always turn screen on after call end so I'm thing it's ROM related and not kernel aloha

[ezaechiel]

OK, I'm using the stock CM dialer too, but never via handfree. For the moment, no problem with stock kernel, but it could be just for the moment . As I said this problem is random.

Envoyé de mon SM-N9005 en utilisant Tapatalk

[yank555]

OK, I'm using the stock CM dialer too, but never via handfree. For the moment, no problem with stock kernel, but it could be just for the moment . As I said this problem is random.

Let's keep observing, if it's anything in the kernel, it needs to get found and be fixed

JP.

[Shaitan]

Hi Yank will your Kernel work with 4.4.3?
Why you use Temasek again? Whats happend on Android Hilfe? Sorry for to many Questions!

[yank555]

Hi Yank will your Kernel work with 4.4.3?
Why you use Temasek again? Whats happend on Android Hilfe? Sorry for to many Questions!

Reported working on 4.4.3.

I'm back on Tema's as on Slim my handfree in my car couldn't place calls... and that I needed. v85 was good, so I'll stay on it for now

AH ... stupid Mods ... censoring users (not me) but I've had enough of their crappy behaviour...

JP.

Send from my 'proudly eFused' Note 3 (n9005) running Temasek v85 on Yank555.lu htle v1.0b-beta8 (3.4.92) kernel.

[Shaitan]

Thanks

[kenzolo]

and I'm also having that phone call proximity issue that was mentioned before

Sent from my SM-N900P using Tapatalk

Three calls with M7 and stock kernel from cyanogenmod and no problem with phone app till now, if the problem appears I'll let you know immediately.

It may be kernel related but which part? Does the kernel interact with proximity sensor?

The exact explanation of the problem is :

- a call is done
- phone goes near to the face
- proximity sensor shuts the screen of
- phone is taken away from the face
- the screen still stays off
- when the screen is touch, the haptic sound happens
- no action (power button, home button,...) could power on the screen.
- wait a long time or hard reboot solve the problem.

I hope this explanation could help to solve the problem if it's due to kernel.

Envoyé de mon SM-N9005 en utilisant Tapatalk

1 open a terminal session

2 type cd /sys/devices/virtual/sensors/proximity_sensor/

3 with the sensor uncovered type "cat state" and write down the value (43 in my case)

4 type "cat prox_cal" and write down the first value (this is the offset), in my case it was 201

5 sum both values, in my case it was 244

6 Convert it to hex (http://www.disfrutalasmatematicas.com/n ... ersor.html), in my case, F4

7 type "echo -en $'xF4' > /efs/prox_cal", instead of F4, put your value

8 type "chown system:system /efs/prox_cal"

9 type "chmod 644 /efs/prox_cal"

10 type "sync"

11 type "reboot"

[lunchboxva]

and I'm also having that phone call proximity issue that was mentioned before

Sent from my SM-N900P using Tapatalk

Three calls with M7 and stock kernel from cyanogenmod and no problem with phone app till now, if the problem appears I'll let you know immediately.

It may be kernel related but which part? Does the kernel interact with proximity sensor?

The exact explanation of the problem is :

- a call is done
- phone goes near to the face
- proximity sensor shuts the screen of
- phone is taken away from the face
- the screen still stays off
- when the screen is touch, the haptic sound happens
- no action (power button, home button,...) could power on the screen.
- wait a long time or hard reboot solve the problem.

I hope this explanation could help to solve the problem if it's due to kernel.

Envoyé de mon SM-N9005 en utilisant Tapatalk

1 open a terminal session

2 type cd /sys/devices/virtual/sensors/proximity_sensor/

3 with the sensor uncovered type "cat state" and write down the value (43 in my case)

4 type "cat prox_cal" and write down the first value (this is the offset), in my case it was 201

5 sum both values, in my case it was 244

6 Convert it to hex (http://www.disfrutalasmatematicas.com/n ... ersor.html), in my case, F4

7 type "echo -en $'xF4' > /efs/prox_cal", instead of F4, put your value

8 type "chown system:system /efs/prox_cal"

9 type "chmod 644 /efs/prox_cal"

10 type "sync"

11 type "reboot"

Is that a fix because I had the problem too until I changed kernels

Sent from my SM-N900P using Tapatalk

[yank555]

[quote="lunchboxva"]and I'm also having that phone call proximity issue that was mentioned before

Sent from my SM-N900P using Tapatalk

Three calls with M7 and stock kernel from cyanogenmod and no problem with phone app till now, if the problem appears I'll let you know immediately.

It may be kernel related but which part? Does the kernel interact with proximity sensor?

The exact explanation of the problem is :

- a call is done
- phone goes near to the face
- proximity sensor shuts the screen of
- phone is taken away from the face
- the screen still stays off
- when the screen is touch, the haptic sound happens
- no action (power button, home button,...) could power on the screen.
- wait a long time or hard reboot solve the problem.

I hope this explanation could help to solve the problem if it's due to kernel.

Envoyé de mon SM-N9005 en utilisant Tapatalk

1 open a terminal session

2 type cd /sys/devices/virtual/sensors/proximity_sensor/

3 with the sensor uncovered type "cat state" and write down the value (43 in my case)

4 type "cat prox_cal" and write down the first value (this is the offset), in my case it was 201

5 sum both values, in my case it was 244

6 Convert it to hex (http://www.disfrutalasmatematicas.com/n ... ersor.html), in my case, F4

7 type "echo -en $'xF4' > /efs/prox_cal", instead of F4, put your value

8 type "chown system:system /efs/prox_cal"

9 type "chmod 644 /efs/prox_cal"

10 type "sync"

11 type "reboot"

Is that a fix because I had the problem too until I changed kernels

Sent from my SM-N900P using Tapatalk[/quote]

No this a general proxy calibration, it's not kernel-related.

JP.

Send from my 'proudly eFused' Note 3 (n9005) running Temasek v85 on Yank555.lu htle v1.0b-beta8 (3.4.92) kernel.