[n9005][2014/DEC/01][TWKK] faux123/Yank555.lu kernel 002b3

[yank555]

@yank555 could you please make a MIUI version?

Hmm ... I don't really know what's special about MIUI ? Just the ramfs, or are there real kernel changes ?

If it's just ramfs, it wouldn't be too hard, if it's a different source base, it'd be quite a bit of work, and I won't likely have time to do it.

JP.

[6h0st]

"Power suspend mode" witch one is better? And what exactly does userspace do? Can you please explain?

[yank555]

"Power suspend mode" witch one is better? And what exactly does userspace do? Can you please explain?

Userspace means kernel needs an app to tell the kernel whem screen is on or off (fauxclock is the only one to handle that).

Hybrid is best.

JP.

Sent from my OnePlus One running stock rooted CM11S.

[jdidtht]

"Power suspend mode" witch one is better? And what exactly does userspace do? Can you please explain?

Userspace means kernel needs an app to tell the kernel whem screen is on or off (fauxclock is the only one to handle that).

Hybrid is best.

JP.

Sent from my OnePlus One running stock rooted CM11S.

Sent from your one plus one ehh.? Lucky man, that's a really nice device, I have seen some that have a really warm color to the screen where whites are almost creams. I suppose its possible to dial that out via kernel if one does have that.

[yank555]

"Power suspend mode" witch one is better? And what exactly does userspace do? Can you please explain?

Userspace means kernel needs an app to tell the kernel whem screen is on or off (fauxclock is the only one to handle that).

Hybrid is best.

JP.

Sent from my OnePlus One running stock rooted CM11S.

Sent from your one plus one ehh.? Lucky man, that's a really nice device, I have seen some that have a really warm color to the screen where whites are almost creams. I suppose its possible to dial that out via kernel if one does have that.

Well to be honest, color calibration can be changed in CM anyway, and there's way more fuzz about that than there should be.

Guess it's also due a bit out of frustration that the device is so hard to get hold of. I got offered an invite 2 weeks ago, just finished restoring my TiBU backup a few hours ago.

In fact I have the very same 'device setup' as I had on the Note 3 CM11, and Nexus

So far impressive phone, especially given it cost me 314.99€, if they had capacity to produce higher volumes, Samsung / htc / LG and thelike would feel it.

And cool thing unlocking the bootloader is just a fastboot command (same as on Nexus), flashing recovery also is, no Odin voodoo magic crap. And doing so DOES NOT VOID THE WARRANTY, just as using custom ROM doesn't, OnePlus even asked SlimROMs to support their device, and custom ROMs can be found on OnePlus's own forum !

Some could copy that (Hello. Samsung !).

I just hope they can get production volumes up...

JP.

Sent from my OnePlus One running stock rooted CM11S.

[jdidtht]

[quote="6h0st"]"Power suspend mode" witch one is better? And what exactly does userspace do? Can you please explain?

Userspace means kernel needs an app to tell the kernel whem screen is on or off (fauxclock is the only one to handle that).

Hybrid is best.

JP.

Sent from my OnePlus One running stock rooted CM11S.

Sent from your one plus one ehh.? Lucky man, that's a really nice device, I have seen some that have a really warm color to the screen where whites are almost creams. I suppose its possible to dial that out via kernel if one does have that.

Well to be honest, color calibration can be changed in CM anyway, and there's way more fuzz about that than there should be.

Guess it's also due a bit out of frustration that the device is so hard to get hold of. I got offered an invite 2 weeks ago, just finished restoring my TiBU backup a few hours ago.

In fact I have the very same 'device setup' as I had on the Note 3 CM11, and Nexus

So far impressive phone, especially given it cost me 314.99€..
JP.

Sent from my OnePlus One running stock rooted CM11S.[/quote]

I've been on the invite list now for about a month and a half, and I sposed another month will go by until I receive my invite to purchase the device.

[yank555]

I've been on the invite list now for about a month and a half, and I sposed another month will go by until I receive my invite to purchase the device.

This invite system is kind of crappy ... but the device surely is impressive so far, would be even at 700€ flagship price.

JP.

Sent from my OnePlus One running stock rooted CM11S.

[yank555]

Beta Kernel Update

Small update to fix intelliactive issues.

Changelog 001b7 (27/07/2014)

• fix intelliactive causing reboots (faux123)
• small update to intelliplug (faux123)
• cpufreq: revert CAF's cpu policy save code (faux123)
  
  Make a Nandroid before flashing this...

• hlteeur-faux123-yank555.lu-NF1-001b7.zip

  (MD5 493005968d3226f65f8c092edfd386f6)

  (6.94 MiB) Downloaded 865 times

[jdidtht]

Beta Kernel Update

Small update to fix intelliactive issues.

Changelog 001b7 (27/07/2014)

• fix intelliactive causing reboots (faux123)
• small update to intelliplug (faux123)
• cpufreq: revert CAF's cpu policy save code (faux123)
  
  Make a Nandroid before flashing this...

• hlteeur-faux123-yank555.lu-NF1-001b7.zip

I have a question about intelliactive. Default high-speed freq is 2.2 and for me it seems to spend most its time at 2.2 if I'm scrolling around or typing reguardless of the hardlimit settings which I also run at your recomended lowered settings, so I lowered high speed freq to 1267 as well, now while scrolling I see it spends majority at 1267 while scrolling around which is better for me, is theor any downside to the kernels ramping up or down with intelliactive with high speed lowered? I figured theirs a reason for the default 2.2 setting but I'm unclear to the reasoning.. Could you educate me slightly if you get a spare moment.? It runs flawless now, and I like interactive but if intelliactive is a more efficient faster gov I'm game. Just need some knowledge. I use perfmon to monitor in real time

[yank555]

Beta Kernel Update

Small update to fix intelliactive issues.

Changelog 001b7 (27/07/2014)

• fix intelliactive causing reboots (faux123)
• small update to intelliplug (faux123)
• cpufreq: revert CAF's cpu policy save code (faux123)
  
  Make a Nandroid before flashing this...

• hlteeur-faux123-yank555.lu-NF1-001b7.zip

I have a question about intelliactive. Default high-speed freq is 2.2 and for me it seems to spend most its time at 2.2 if I'm scrolling around or typing reguardless of the hardlimit settings which I also run at your recomended lowered settings, so I lowered high speed freq to 1267 as well, now while scrolling I see it spends majority at 1267 while scrolling around which is better for me, is theor any downside to the kernels ramping up or down with intelliactive with high speed lowered? I figured theirs a reason for the default 2.2 setting but I'm unclear to the reasoning.. Could you educate me slightly if you get a spare moment.? It runs flawless now, and I like interactive but if intelliactive is a more efficient faster gov I'm game. Just need some knowledge. I use perfmon to monitor in real time

Well touchboost freqs are not the same as inter-/intelliactive tunables.

Touchboost will simply force a minimal cpu freq when touching the screen, to ensure you'll not got lags because the governor had scaled down too much.

Interactive is a pretty much all or nothing kn=ind of governor, so as soom as load is seen, it ramps pretty high (can't remember off hand which tunable is which, but a quick google should get you to a good xda post explaining this).

Stock Interactive is extremely trigger-friendly and needs some sooling down

I've done a little on my yankactive (CM kernel), faux has done some more with intelliactive.

JP.

Sent from my Nexus 5 running stock rooted AOSP on Yank555.lu v1.0-alpha5 kernel.